![]() I´l got a LS220D so my question is did this also working for a ls220D and modifire the firmware LS200-v170 ? Hi there and thank You for all your Work. After update process is done you can SSH-ing to the box using root. Next, perform update process by clicking the Update button. Update: Update initrd (only if you add features to initrd image).In the Debug Mode dialog, tick the following options: Copy and replace original firmware with the opened firmware from previous step.Īppend the following lines to LSUpdater.ini Įxecute LSUpdater.exe, activate debug mode by clicking in the upper left corner (see figure below). You need a windows box (or Machintosh) to flash Buffalo firmware. The opened firmware image can be found on ~/lsmod/linkstation-mod-master/out/ folder named as hddrootfs.img and initrd.img. Opened INITRD image saved in /home/toha/lsmod/linkstation-mod-master/out/initrd.img. Opening stock firmware INITRD of firmware/ls400-133en/initrd.img.Īpplying patch from /home/toha/lsmod/linkstation-mod-master/data/nas_features. scripts/open-ls-initrd-cpio.sh firmware/ls400-133en/initrd.img Opened ROOTFS image saved in /home/toha/lsmod/linkstation-mod-master/out/hddrootfs.img.Īdditionally, you can add features by editing data/nas_features and issue the following command: $ sudo. > Allowing root login via telnet and ssh. Removing root password from initfile backup. Using password 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l. Opening stock firmware ROOTFS of firmware/ls400-133en/hddrootfs.img. scripts/open-ls-rootfs.sh firmware/ls400-133en/hddrootfs.img Execute the script to open the stock firmware.You then can copy the file to linux box using WinSCP for example and put in the data folder. After the key generation is complete, do not close the puTTYgen window, rather select all the text in the generated public key, press Ctrl+C to copy the content and paste it as text file in notepad and save the file with. On windows box, use puTTYgen to generate SSH private/public key pair. If you’re already using a linux box, simply copy id_dsa.pub or id_rsa.pub to data folder. Prepare SSH public key for login authentication.Get the Buffalo stock firmware from, the latest firmware as of this writing is 1.33.Īfter unzip process, the firmware can be found on the ~/lsmod/linkstation-mod-master/firmware/ls400-133en/ folder.This process based on existing method on , tested on LS421DE: Furthermore, a custom operating system can be used to replace the Buffalo stock firmware such as Debian. With root access, several additional softwares can be added to the firmware, e.g: using optware package. The purpose for opening a stock firmware is to gain root access to LinkStation. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |